• What is fullwave , semiwave, common mode, degas mode, turbo sweep, power sweep , pulse mode ?

    Fullwave: Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Generally different stuffs should be cleaned with different ultrasonic cleaners with different frequencies. Semiwave: Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave and its wave amplitude is a half of the original single frequency; Common mode: Common mode is a general cleaning mode based on a single frequency ultrasonic wave and its wave amplitude……

  • How to choose suitable frequency for ultrasonic cleaner?

    Before we know the difference between ultrasonic bath frequencies we should know what the corresponding frequencies mean. 28KHz refers to the number of vibration per minute, which is 28,00040KHz is the number of vibration per minute, which is 40,000 In the field of ultrasonic cleaning, the greater the number, the number of vibrations there are,the most common frequency one is 40 KHz, one is 28 KHz. Generally, the larger the bubble generated by the low-frequency acoustic wave, the strong……

  • Is ultrasonic cleaner harmful to humans?

    When you use the ultrasonic cleaner, there are a lot of noise, maybe you’re worried that ultrasonic waves are harmful for your body. Ultrasound is not harmful to humans.There are also cases and applications of ultrasound in medicine.And the noise produced by ultrasonic cleaning is the sound of bubbles bursting in the solution, which does no harm to the human body. The main impact on the human body is the noise pollution of ultrasonic, people will be agitated, restless mood. Gener……

  • How long is the service life of ultrasonic bath?

    The service life of ultrasonic cleaner depends on several points. One is depend on the quality of transducer, and the other is how long the generator will last. You’d better purchase industrial grade ultrasonic bath from factory direct sale. Because their transducer is made of imported pressed ceramic parts,imported glue bonding and welding nail double process fixation. Glue bonding and welding nail technology requirements are very strict. Each line of transducers should be kept ……

  • Common fault and solutions of the ultrasonic cleaner

    Please do not start the machine if no any water and solution in the ultrasonic cleaner tank, to avoid the air vibration. Or the vibration head will damage easily. Therefore, please use and operate the ultrasonic cleaner correctly. Common fault and eliminating method 1.Switch on the ultasonic cleaner , No LED indicator ,No ultrasonic. Cause: Power socket is Ok, no electricity input. (ACFU)Fuse burned-out. 2. Switch on the ultasonic cleaner, LED indicator light on, No ultrasonic. ……

  • What’s the degas functions ?

    1, Greatly shorten the heating or colling time after water injection, It is good for the system after the first adjustment. 2. Remove the gas ,prevent the gas resistance, ensure the stability of the ultrasonic system during the machine is normal working. 3. Eliminate the cavitation of water pump and reduce the noise. 4.After the oxygen removal from water, It will reduce the aerobic corrosion and extend the service life. 5. After the oxygen removal from water, It will improves the……

  • How to choose the ultrasonic power ?

    If the ultrsonic power too small , it will spend long time to remove the dirt. For the industry cleaning ,the ultrasonic power will be from 100W-1500W.  Before cleaning , please take the cleaning tank size if can fill in your objects, the clening power depend the size of the cleaning tank. The larger of ultrasonic cleaner, The higher ultrasonic power. So the better way is to do the experiment at the first time, and then choose the appropriate ultrasonic cleaner. In addition, you can ……